The video above is a great example. in about 10 minutes we will take you through a simple process to detect standing water with the sprout board. Code example in the video can be downloaded here.
The parts needs for this are extremely easy. One copper clad board, some solder and soldering iron, and a 2 strand wire lead. i recommend 2 strand cat 3 for the wire.
30 June 2010
Lots of new guides added!
We have added a bunch of new guides to help you expand what you can do with your sprout board. Check them out!
21 June 2010
How to drive an AC load
In about 10 minutes we will take you through a simple process to control an AC load using the sprout board…
1 June 2010
Open Source Server Room Initiative
The Sprout Board is the center of a move to open source high priced server room monitoring equipment in an effort…
25 May 2010
Sprout Board available for order!
That’s right! The sprout board can be purchased now!
" Working with the sprout board has been one of the best tinkering project experiences I have ever had. The attention to detail and feature set of the board as well as its clean design lends its self to many applications. Additionally the flexibility in allowing for external sensor and devices makes this extremely powerful for real world projects."
-Jayson Givens
" We needed a server room environmental monitoring system at my employer. After looking into the options we decided to buy the sprout board and rack mount chassis. The project works flawlessly and reliably at 1/5th the cost of a comparable system."
-Tom Needer
Home |
Terms of Use |
Privacy Policy |
Contact |
RSS
© Copyright 2010 SproutBoard.com - All Rights Reserved